Pusher PRC1012MKT 3.5" MEGA Intake System 2010-2012 Ram 6.7L Cummins

The Pusher 3.5" MEGA Intake System with replaces your stock post-intercooler piping and intake manifold with 3.5" mandrel bent tubing, significantly increasing the flow volume and efficiency of your charge system. The Pusher Intake Manifold is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line. Our design also allows for the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. This frees up airflow even more while maintaining the stock six bolt pattern for a proper seal.

With this vast improvement over the stock manifold you can expect quicker turbo spool, lower EGTs, and less over all strain on your motor. This manifold also includes instructions, a polished stainless dipstick mount, port plugs, OEM gasket and hardware to make installing this intake extremely easy. This manifold is for off road use only.

Our 3.5" intercooler tubing is constructed from mandrel-bent, 0.060" thick mild steel, offering a significant upgrade over the factory 2.4" ID plastic piping. The kit includes heavy duty 5-ply silicone couplers and stainless steel T-bolt clamps for an easy installation. Unlike the factory setup, there's no need to cut off steel bands to save the factory boots—simply loosen the factory clamps and replace them with the provided components for a straightforward upgrade.

This product is designed to be compatible with the factory intercooler and will also work with aftermarket intercoolers that maintain the same inlet and outlet configurations as the factory setup.

By replacing your restrictive factory system with a Pusher Intake System, you can expect results of:

Features

• 50-200 degree Fahrenheit drop in EGTs
• 0.5-1 mpg increase
• Over 65% increase in airflow over the stock parts replaced
• Significant gain in throttle response
• Faster turbo spool
• Increased durability

Available Options

• Frame Type: Regular, Cab Chassis
• Powder Coat Color: Uncoated - must be powder coated before install, Pusher Green, Titanium, Gloss Black, Gloss Red, Gloss White, Gloss Blue, Pusher Bronze
• Additional 1/8" NPT Sensor Ports: No, Add 2 Ports, Add 4 Ports

Fitment

• 2010-2012 Ram 2500/3500 6.7L Cummins

Note: For vehicles with emissions equipment removed. Not compatible with factory emissions systems.