ARP 250-4301 head stud kit for the 2011-2023 Ford 6.7L Power Stroke. ARP cylinder head studs are rated at 220,000 psi tensile strength and provide the clamping force needed to keep the cylinder heads from lifting under higher combustion pressures, the best insurance against head gasket failure on a tuned or hard-working diesel. The studs are made from ARP’s proprietary ARP2000 material, heat-treated before the threads are rolled for optimum fatigue strength, and centerless ground for perfect concentricity.
Even mild upgrades on a 6.7L Power Stroke raise cylinder pressure quickly, so head studs are smart preventative maintenance. Unlike torque-to-yield factory head bolts, studs are installed hand tight and the nut does the clamping, so the load is pure tension with no twisting. That gives a more even, repeatable clamp load, and the studs are reusable.
Features
- ARP2000 material rated at 220,000 psi tensile strength
- Threads rolled after heat-treat for optimum fatigue strength
- Centerless ground for perfect concentricity
- Broached stud ends make installation (and head removal in tight quarters) easier
- Heat-treated chrome moly 12-point nuts
- Hardened, parallel-ground washers for even load distribution and accurate torque readings
- Black oxide finish
- Replaces the factory head bolts; reusable
- Made in the USA
Specifications
- Part Number: 250-4301
- Material: ARP2000, 220,000 psi tensile strength
- Nut style: 12-point
- Thread: M12 x 1.75 main studs plus M8 studs
- Torque: M12 nuts 40, 80, then 125 ft-lbs; M8 nuts 28 ft-lbs, with ARP Ultra-Torque lube
Installation Notes
- Chase the block threads with ARP thread chaser 912-0008 (M12 x 1.75)
- Install studs hand tight only; the hex broach is for installing/removing, not for torque
- The shorter M12 studs go in positions 11, 13, 15 and 17
- Test fit the valve covers for stud clearance before final assembly
Fitment
- 2011-2023 Ford F-250/F-350 Super Duty 6.7L Power Stroke
- 2011-2023 Ford F-450/F-550 6.7L Power Stroke
What’s Included
- ARP2000 head studs (both heads)
- 12-point nuts
- Hardened parallel-ground washers
- ARP Ultra-Torque fastener assembly lubricant