Secure Checkout
6 Inch Lift Kit - No OVLDS - D/S - M1 - Ford Super Duty 4WD (17-22)

Thumbnail Filmstrip of 6 Inch Lift Kit - No OVLDS - D/S - M1 - Ford Super Duty 4WD (17-22) Images

    Purchase 6 Inch Lift Kit - No OVLDS - D/S - M1 - Ford Super Duty 4WD (17-22)
    SKU: DHTP-51341

    6 Inch Lift Kit - No OVLDS - D/S - M1 - Ford Super Duty 4WD (17-22)

    $1,769.95
     

    Take your truck to new heights with Rough Country's 6in Suspension Lift! This all-inclusive kit comes with everything you need for a total trasnformation of your truck. Run up to 37in tires while preserving the smooth, factory ride quality with this impressive upgrade. When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 6-inch Suspension Lift features a set of ultra-durable radius arms drop brackets, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. This kit includes a set of lifted coil springs and ultra-durable, fabricated anti-wrap rear blocks that prevent binding and axle wrap. Best of all, this kit comes with your choice of Rough Country's N3, V2 Monotube, or Vertex Adjustable Reservoir shocks! Includes Rough Country's Lifetime Replacement Warranty

    • Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.
    • Radius arm drop brackets allow for properly set caster
    • Proper caster is crucial to maintaining factory handling and drivability
    • Levels the front with the rear of the vehicle
    • Increased ground clearance
    • Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
    • Easy bolt-on installation
    • Fabricated blocks are stronger and offer a longer lifespan than cast blocks
    Note(s)
    Does NOT fit gas engine models. Does NOT fit dually models. Does NOT fit manual shift transfer cases Does NOT fit models with 3.5" rear axle tube Does NOT fit models equipped with rear factory contact overload springs Does NOT work on models equipped with Tremor Factory Trim Package
    Additional Attributes
    Front Components: Lifted coil springs, Radius arm drop brackets, Front Drive Shaft, Sway-bar links, Track bar drop bracket, Stabilizer relocation brackets, Pitman arm, Brake line brackets, Bumpstop spacers, Hardware
    Install Time: 4-6 hours
    Rear Components: Fabricated lift blocks, Brake line brackets, U-bolts, Hardware
    Tire, Wheel, and Offset Info: 37x12.50R17:17x9:8x170:-12:-; 37x12.50R17:17x9:8x170:+0:-; 37x12.50R17:17x9:8x170:+1:-; 37x12.50R18:18x9:8x170:-12:-; 37x12.50R18:18x9:8x170:+0:-; 37x12.50R18:18x9:8x170:+1:-; 37x12.50R20:20x9:8x170:-12:-; 37x12.50R20:20x9:8x170:+0:-; 37x12.50R20:20x9:8x170:+1:-; 37x12.50R20:20x10:8x170:-25:-; 37x12.50R20:20x10:8x170:-24:-; 37x12.50R20:20x10:8x170:-19:-; 35x12.50R20:20x10:8x170:-19:-; 37x12.50R20:20x10:8x170:-18:-; 35x12.50R20:20x10:8x170:-18:-; 37x12.50R20:20x12:8x170:-44:Trimming Required; 35x12.50R20:20x12:8x170:-44:Trimming Required; 37x12.50R22:22x9:8x170:-12:-; 37x12.50R22:22x9:8x170:+0:-; 37x12.50R22:22x9:8x170:+1:-; 37x12.50R22:22x10:8x170:-25:-; 37x12.50R22:22x10:8x170:-24:-; 37x12.50R22:22x10:8x170:-19:-; 35x12.50R22:22x10:8x170:-19:-; 35x12.50R22:22x12:8x170:-44:Trimming Required
    Vehicle Fitments
    • Ford F-250 Super Duty 2017 to 2022
    • Ford F-350 Super Duty 2017 to 2022
    Related Products