FASS Universal / Class 8 240gph - 40-45psi Industrial Series Plus Fuel Air Separation System

FASS Industrial Series PLUS Technology: Your investment lives or dies on productivity, efficiency, uptime, and operating cost. The FASS Industrial Plus Series protects all four, delivering "Test Cell" fuel conditions in the "Real World." Class 8, agriculture, marine, forestry, airports, military, generators — if it runs on diesel, FASS is there.

The features that set FASS apart from everyone — air/vapor separation, a 20,000+hr/1,000,000-mile high-torque motor, extreme water-volume protection, and optional Arctic heating. Tap any feature to see what it delivers.

FASS delivers exactly what we state: the flow rate and the pressure your application needs, in our part number. Others slow the flow to quiet the motor and market an “assumed” GPH number that falls short of what you thought you bought.

Features

• FASS Air/Vapor Separation Technology
• Extreme Water Separation
• Continuous Fuel Polishing
• Microglass 2-Micron Absolute Filtration
• FASS rates systems by GPH at operating pressure, on diesel fuel. This is now in our part number— a standard we’re not aware of anyone else in the industry holding to.
• FACT: With FASS, the GPH number is the flow rate on diesel fuel
• Home of the 20,000+hr/1,000,000-mile FASS motor. Under 0.5% failure rate. Nothing in the industry comes close.
• Dependability + simple and straightforward = PRODUCTIVITY!
• The quietest motor in the industry, period — at any flow rate and pressure
• The black anodized aluminum heat sink routinely pulls more than 20°F out of the motor
• FASS will “TRIPLE” the life of your fuel injection system — and keep thousands of dollars in your pocket over the long haul
• Diesel engine output depends on precise fuel injection timing, and air/vapor undermines that precision
• Soot/Emissions: down 18-76.8% — plus reductions across CO, CO₂ and oxides of nitrogen.
• EGTs (turbo temps): typical stock applications 50-100°F; modified applications 150-200°F, and more in severe situations.
• Water/oil temps: reported 15-25°F.
• Oil consumption: customers have reported reduced oil consumption.