Secure Checkout
6 Inch Lift Kit - X-Series - Jeep Wrangler TJ 4WD (1997-2006)

Thumbnail Filmstrip of 6 Inch Lift Kit - X-Series - Jeep Wrangler TJ 4WD (1997-2006) Images

    Purchase 6 Inch Lift Kit - X-Series - Jeep Wrangler TJ 4WD (1997-2006)
    SKU: DHTP-66220

    6 Inch Lift Kit - X-Series - Jeep Wrangler TJ 4WD (1997-2006)

    $1,349.95
     

    Venture far beyond the limits of a stock Wrangler with Rough Country's all-inclusive 6-inch X-Series Lift for Jeep TJ. Level the front of your vehicle with the rear while gaining enough increased ground clearance to run up to 35-inch tires. Rough Country's X-Series line represents the best-in-class equipment for off-road action, including X-Flex Adjustable Control Arms, durable rubber bushings, Sway-bar quick disconnects, and our Premium N3 shocks. For those who are serious about flexing, crawling, and pushing your Jeep to the limits, this kit features an upgraded Forged Adjustable Track Bar. Made of forged steel, this 16lb Track Bar boasts a beefy construction that will dwarf stock equipment. Easy to install and fully adjustable on the vehicle. This kit includes Rough Country's Lifetime Replacement Warranty.

    • Upper joints pivot up to 20 degrees
    • Quick disconnects quickly and easily store out of the way when not in use
    • Lower joints pivot up to 35 degrees.
    • Levels the front with the rear of the vehicle
    • Increased ground clearance
    • Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
    • X-Flex control arm features: durable OEM style rubber bushings
    • Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability Coil springs are progressive rate for enhanced ride quality
    • Flex joints feature a massive 2.5" diameter body and 1.25" thread
    • Easy bolt-on installation
    • Fully greaseable
    Note(s)
    Transfer case drop kit or Slip Yoke Eliminator with CV Driveshaft is recommended to avoid driveline vibration. Rubicon models do not need a SYE kit or transfer case drop but a CV driveshaft is still recommended.
    Additional Attributes
    Front Components: Lifted coil springs, Upper adjustable control arms, Lower adjustable control arms, Pitman arm, Sway-bar quick disconnects, Forged adjustable track bar, Track bar drop bracket, Stainless steel braided brake lines, Hardware
    Install Time: 6-8 hours
    Rear Components: Lifted coil springs, Upper adjustable control arms, Lower adjustable control arms, Lower shock brackets, Track bar drop bracket, Stainless steel braided brake lines, Hardware
    Tire, Wheel, and Offset Info: 35x12.50R15:15x8:5x4.5:-19:-; 35x12.50R15:15x8:5x4.5:-18:-; 35x12.50R15:15x8:5x4.5:-12:-; 35x12.50R15:15x8:5x4.5:-6:-; 35x12.50R15:15x10:5x4.5:-44:-; 35x12.50R15:15x10:5x4.5:-38:-; 35x12.50R16:16x8:5x4.5:-19:-; 35x12.50R16:16x8:5x4.5:-18:-; 35x12.50R16:16x8:5x4.5:-12:-; 35x12.50R16:16x8:5x4.5:-6:-; 35x12.50R16:16x10:5x4.5:-44:-; 35x12.50R16:16x10:5x4.5:-38:-; 35x12.50R17:17x8.5:5x4.5:+0:-; 35x12.50R17:17x8.5:5x4.5:+1:-; 35x12.50R17:17x9:5x4.5:-12:-; 35x12.50R17:17x9:5x4.5:+0:-; 35x12.50R17:17x9:5x4.5:+1:-; 35x12.50R18:18x8.5:5x4.5:+0:-; 35x12.50R18:18x8.5:5x4.5:+1:-; 35x12.50R18:18x9:5x4.5:-12:-; 35x12.50R18:18x9:5x4.5:+0:-; 35x12.50R18:18x9:5x4.5:+1:-; 35x12.50R20:20x9:5x4.5:-12:-; 295 60R20:20x9:5x4.5:-12:-; 35x12.50R20:20x10:5x4.5:-19:-; 295 60R20:20x10:5x4.5:-19:-; 35x12.50R20:20x10:5x4.5:-18:-; 295 60R20:20x10:5x4.5:-18:-
    Vehicle Fitments
  • Jeep Wrangler 1997 to 2006
  • Related Products